Tile Insert Shower Grate - 316 Stainless Steel - 85mm width Standard Length

DrainTEK Product Code : SSG-IND-TI085-1204

These standard-size tile insert shower grates are manufactured by DrainTEK. Insert your floor tiles into the removable tray to achieve an almost invisible drain! Being 1.2mm thick marine grade 316 stainless steel, the quality and value-for-money is superior to most shower grate products on the market. Choose from 3 standard sizes below: 900mm, 1000mm, or 1200mm.

Read more
$221.80
- +
Add to Wish List
Item dispatched within 1 business day All our products are stocked in Australia and are ready to ship to you.
Favourite Favourite

Linear tile insert shower grates - for a minimalist drain

DrainTEK's standard-size tile insert shower grates are manufactured in Australia. It is the best choice for any new build or renovation. Being 1.2mm thick marine grade 316 stainless steel, the quality and value-for-money is superior to most shower grate products on the market.

 

Highest quality linear drains for premium bathrooms

  • Full 316L (low carbon) marine grade stainless steel
  • The tray in all materials is 1.2mm thick for superior strength
  • 30mm deep V profile drain tray for efficient water drainage
  • 10mm deep tile tray to accommodate most floor tiles
  • Full welded water-tight construction
  • 40mm diameter centred outlet - suitable to fit inside all waste pipe sizes

Highest Specifications


Tray

  • Comes in 3 standard sizes to choose from: 900mm / 1000mm / 1200mm
  • Full 316L (low carbon) marine grade stainless steel tray and outlet (1.2mm thick)
  • V profile with 30mm depth for efficient drainage
  • 40mm diameter centred outlet - suitable to fit inside all waste pipe sizes
  • Watermark licensed under WMTS-040 - Certificate 23396


Tile Insert Tray 

  • Full 316L (low carbon) marine grade stainless steel 1.2mm thick
  • Support feet along the entire length for heavy-duty load support
  • No plastic components


Lifetime Warranty

  • Lifetime guarantee against manufacturing defects

 

Dimensions

stainless steel 85mm wide shower grate with tile insert dimensions

Click on the icon below to download the PDF manual for this product


Typical Installation Steps

  1. Construct shower surround in accordance with structural requirements leaving a penetration for drainage
  2. Add a suitable drainage flange and fasten/bond in place and cap during the building phase. DrainTEK recommends using a suitable puddle flange with an internal diameter large enough for the shower grate outlet to fit loosely within
  3. Complete water-proofing in accordance with AS3740 with waterproofing turned down into plumbed drain
    Note: Do not integrate tray with the water-proofing as steel expands/contracts differently to other materials
  4. Adjust height of adjustable puddle flange (if installed) to suit desired shower grate height If your tray outlet is not attached, then adhere with a waterproof adhesive sealant prior to installation and ensure it is secure
  5. Set tray at required height in mortar so the finished tiles will be just above the top edge of the grate tray

Lifetime Warranty

All drainTEK linear channels and grates come with a Lifetime Guarantee against manufacturing defects. Conditions may apply - see Renovator Store Warranty Terms and drainTEK Warranty Protection Page.

Write Your Own Review
You're reviewing:Tile Insert Shower Grate - 316 Stainless Steel - 85mm width Standard Length
Your Rating
You may also like
Google