Shower Grate - Wedge Wire / Heel Guard Style 3mm Gaps - 85mm - Brass Finish - Custom Length and Outlet

DrainTEK Product Code : CSG-IND-WW-085-0910-BR

DrainTEK manufactures these custom-made wedge wire linear grates to order in any length and lets you decide on the outlet's diameter and location. DrainTEK  custom drains are made in Melbourne using 316L stainless steel and is Watermark certified. This variant has a brass finish that resembles gold and will work well with other brass bathroom tapware. The quoted price is made up of:

  • The base manufacturing charge of $49.95
  • A charge of $0.30 for each mm of length (Select the width and then enter the length where prompted below)
Read more
+ $0.30 per mm
$49.95 + $0.30 per mm
Length (mm):
- +
Add to Wish List

Typically produced/dispatched in 3 business days Jump-the-Queue option available for urgent orders. Enter your postcode to see shipping costs.

Favourite Favourite

Linear Wedge Wire Shower Grates in Brass finish

DrainTEK manufactures custom wedge wire shower grates in any length upon request. You can choose the size and location of the outlet, making it the most flexible option for any renovation or new construction. This custom shower drain is of the highest quality, and you won't find one like it at a lower cost. You can also choose this brass finish, which will give your shower area more style. It has a gloss that is reminiscent of gold and will work with both lavish and simple interior design.

This firmer wedge wire grate has support bars that are 25mm apart, compressed enough to take more weight. The close gaps between the wires also make this heel guard grate achieve an aesthetic look.

If you require a corner piece (for the L shape configuration), please add your corner piece here.

Highest quality linear drains for premium bathrooms

  • Full 316L (low carbon) marine grade stainless steel
  • The tray is 1.2mm thick for superior strength
  • V profile drain tray for efficient water drainage
  • Fully welded high load bearing wedge wire insert (3mm wedge wires and 3mm gaps)
  • Wedge wire grate has support bars placed 25mm apart from each other for stronger support
  • Manufactured in Australia to any length with specified outlet position and size
  • Finished in brass to complement a variety of materials and colour palettes 



Highest Specifications


  • Full 316L (low carbon) stainless steel tray and outlet (1.2mm thick) in any length
  • V profile with 30mm depth for efficient drainage
  • Choice of 40mm or 50mm diameter outlet at any position
  • Watermark licensed under WMTS-040 - Certificate 23396
  • Note: Tray lengths are typically available in up to 3000mm. Total drains ordered in excess of this will be supplied in multiple tray pieces which are easily joined with supplied joiner plates using a quality waterproof adhesive silicone (eg. Sikaflex)
  • Manufactured in Australia
  • Finish: Brass


Wedge Wire Insert 

  • Wedge wires 3mm wide with 3mm gaps and 5mm x 20mm heavy duty supports
  • Wedge wire support bars every 25mm for superior strength and heavy duty load support
  • No plastic components
  • Note: Inserts longer than 1500mm can often be too heavy to handle safely. Therefore lengths longer than this will typically be supplied in multiple equal lengths which will butt together for a seamless look. Contact us if you have a preference for longer inserts in your order
  • Manufactured in Australia
  • Finish: Brass


Lifetime Warranty

  • Lifetime guarantee against manufacturing defects

Click on the icon below to download the PDF manual for this product

Typical Installation Steps

  1. Construct shower surround in accordance with structural requirements leaving a penetration for drainage.
  2. Add a suitable drainage flange and fasten/bond in place and cap during the building phase. DrainTEK recommends using a suitable puddle flange with an internal diameter large enough for the shower grate outlet to fit loosely within.
  3. Complete water-proofing in accordance with AS3740 with waterproofing turned down into the plumbed drain.
    Note: Do not integrate tray with the water-proofing as steel expands/contracts differently to other materials.
  4. Adjust the height of adjustable puddle flange (if installed) to suit desired shower grate height If your tray outlet is not attached, then adhere with a waterproof adhesive sealant prior to installation and ensure it is secure.
  5. Set tray at required height in mortar so the finished tiles will be just above the top edge of the grate tray.



Lifetime Warranty

All drainTEK linear channels and grates come with a Lifetime Guarantee against manufacturing defects. Conditions may apply - see Renovator Store Warranty Terms and drainTEK Warranty Protection Page.

Write Your Own Review
You're reviewing:Shower Grate - Wedge Wire / Heel Guard Style 3mm Gaps - 85mm - Brass Finish - Custom Length and Outlet
Your Rating
You may also like