Shower Grate - Wedge Wire - Standard Sizes

DrainTEK Product Code : CSG-IND-WEDWIR-0910-S

These standard size wedge wire shower grates are manufactured by DrainTEK. It will come with a centred waste outlet with a 40 or 50 mm diameter to choose from. The quality is superior to most shower grate products on the market and you will not find a better-priced shower drain at this quality level. If you cannot find the size that you are looking for, please have a look at DrainTEK custom length grates.

 

Read more
$239.36
- +
Add to Wish List

Enter your postcode to estimate your shipping cost

Item dispatched in 3 - 5 business days Express shipping is not available. *
See shipping information.
Favourite Favourite

Linear wedge wire shower grates - modern simplicity

DrainTEK's standard size wedge wire shower grates are manufactured by DrainTEK. You can choose a 40mm or 50mm diameter centred waste outlet. The quality is superior to most shower grate products on the market and you will not find a better-priced shower drain at this quality level. If you cannot find the size that you are looking for, please have a look at DrainTEK custom length grates.

Highest quality linear drains for premium bathrooms

  • Full 316L (low carbon) marine grade stainless steel
  • The tray is 1.2mm thick for superior strength
  • V profile drain tray for efficient water drainage
  • Fully welded high load bearing wedge wire insert (3mm wedge wires and 3mm gaps)
  • Manufactured in Australia

Highest Specifications

Tray

  • Full 316L (low carbon) stainless steel tray and outlet (1.2mm thick) in standard size
  • V profile with 30mm depth for efficient drainage
  • Choice of 40mm or 50mm diameter centred waste outlet
  • Watermark licensed under WMTS-040 - Certificate 23396
  • Manufactured in Australia

Wedge wire insert 

  • Wedge wires 3mm wide with 3mm gaps and 5mm x 20mm heavy duty supports
  • Wedge wire support bars every 25mm for superior strength and heavy duty load support
  • No plastic components
  • Manufactured in Australia

Lifetime Warranty

  • Lifetime guarantee against manufacturing defects

 

Dimensions

wedge wire shower grates

Click on the icon below to download the PDF manual for this product

 

Typical Installation Steps

  1. Construct shower surround in accordance with structural requirements leaving a penetration for drainage
  2. Add a suitable drainage flange and fasten/bond in place and cap during the building phase. DrainTEK recommends using a suitable puddle flange with an internal diameter large enough for the shower grate outlet to fit loosely within
  3. Complete water-proofing in accoordance with AS3740 with water proofing turned down into plumbed drain
    Note: Do not integrate tray with the water-proofing as steel expands/contracts differently to other materials
  4. Adjust height of adjustable puddle flange (if installed) to suit desired shower grate height If your tray outlet is not attached, then adhere with a water proof adhesive sealant prior to installation and ensure it is secure
  5. Set tray at required height in mortar so the finished tiles will be just above the top edge of the grate tray

drainTEK Lifetime Warranty

Every drainTEK drain grate you purchase includes a lifetime guarantee against manufacturing defects.  For details, read the warranty terms and conditions on the drainTEK Warranty Protection page.

Write Your Own Review
You're reviewing:Shower Grate - Wedge Wire - Standard Sizes
Your Rating
Google